Remington Barrel Only for M 1867 Navy Carbine

Brand-new M9 Factory Magazine. acquire in bulk

We discovered this original rear sight on a Smith & Wesson 320 revolving rifle a number of years ago. The replacement parts inventory from the Smith and Wesson Factory was released in a collection that includes a sizeable amount of them. Bins upon bins of New Old Stock components were there, some dating as far back as S&W No. 1, 2nd Issue Revolvers from the 1860s. But the majority of it dates from the early to mid-20th century. There was so much of it that these guys were having trouble identifying it all and a gunsmith friend of mine was helping them out. they are impossible to find and production was extremely limited.This sight was the only one they had. Aside from being in storage for over 100+ years and coming into contact with other parts, it was almost brand new, having never been installed on a gun. Smith and Wesson only produced 977 Model 320 Revolving Rifles. Here is a once-in-a-lifetime chance to pick up one up..

30 round new Magpul AK-47 7.62x39 magazines. They will function in common double-stack 7.62x39 AK-type rifles, though they could require a little filing to function in some imported guns that had their magwells opened.

This tactical vest has full front, back and side armor plate level III protection stops most common rifles calibers (5.56 7.62 .308). 100% made in the USA, top quality made by american workers! CATI AR500 patent pending swimmer/climber cut from plate allows for full range of arm movement with no interference from the top of the plate while still protecting vital organs. SPECS: VEST- PALS Webbing for Easy Configuration. * Removable Shoulder Pads with PALS Webbing * Fully Adjustable Shoulder Straps. * Durable Drag Strap on back and Heavy Duty D rings on the front * Cummerbund is adjustable for length. Eyelets and adjustable Bungee cord in the back. * Size: Fit S to XXL T-shirt sizes. ARMOR SPECS: 2 10"x12" front and rear plates, 2 6'x8" side plates. AR500 Armor Plate is a high hardness (HH) steel used for High Impact and Abrasion Resistant (AR) applications. To be effective in armor applications to perform to NIJ Level 3 standards, this plate should be in the 505-530 range on the Brinnell Harness Scale. Level 3 is rated for M80 Ball at 2800 Feet per second, all AK variants and defeats Green Tip M855 as well at 50 feet out of a 16 inch barrel. We utilize a Rhino Linings Industrial product that is recommended and developed specifically for anti-splatter (spalling) mitigation by Rhino Linings Military Research and Development. This is a premium coating that costs 30% more than standard truck bed liner coatings provided by others. The only other product on the market that is equal in properties is Line-X PAXCON. Multi-Curve CQB: At the forefront of AR500/AR600 forming technology, we’ve created a “Patent Pending” protected process to achieve the greatest comfort, concealable and weight distributing steel armor plates on the market (Combat Quad-Bend). The CQB is our top of the line forming process and is modeled from Tier 1 Operator plate multi-curvature that is tried and true for comfort and tactical applications. This plate wears lighter than any other steel armor on the market. The CQB can be placed in front or rear configurations. Also produce CQB Training plates for the gym and cross training, called CATI HIT system.SIDE PLATES are are the same level protection and coating process. 2-CQB MULTI-CURVE STEEL ARMOR 10x12 Base Coated Plates one full traditional full cut to wear in the rear of carrier for great coverage and one CQB Swimmer Plate for the front for great range of motion.

SPECIAL FORCES VEST PACKAGE IN PARACLETE, MULTICAM CAMO, WITH ARMOR ATTACHMENTS AND ACCESSORIES This vest is SIZE LARGE/X-LARGE and has complete shoulder and waist adjustments. This Paraclete special forces vest includes a KEVLAR, LEVEL 3A helmet with chin strap suspension system, multicam camo helmet cover, and a completely NEW pair of ESS GOGGLES that were removed from the factory plastic for the purpose of these photos and come with all the goggle accessories and pouch as pictured._____________________________________________________________________________________________________________________ THIS PARACLETE VEST COMES WITH THE FOLLOWING KEVLAR ARMOR FOR THE VEST: LEVEL 3A KEVLAR GENTEX HELMET (helmet is in excellent condition and was never fielded but would be considered used because it was not taken out of the factory packaging) As mentioned before The helmet comes with a multicam camo helmet cover and has a chin suspension system that is adjustable. LEVEL 3A ARMOR SHOULDER/BICEPS PROTECTORS “DAPS”. LEVEL 3A ARMOR multicam camo GROIN PROTECTOR, LEVEL 3A ARMOR multicam camo LOWER BACK PROTECTOR. LEVEL 3A ARMOR multicam camo SIDE POUCHES WITH ARMOR INSERTS._____________________________________________________________________________________________________________________ This RARE vest package comes with The following accessories on the VEST: LEFT/RIGHT multicam camo shoulder pads with 9 slots on each side for rifle Ammo/ blasting detonators/communication wires. (1) multicam camo admin pouch on the front of the vest with a flashlight pouch and a multicam camo American flag Velcro patch. (1) Triple pistol multicam camo mag Pouch. (1) Triple rifle multicam camo magazine pouch that holds a total of six rifle magazines. (1) heavy duty steel quick release bungee multicam camo single point rifle sling with carabiner shoulder clip attachments. (2) Side Breacher multicam camo 12 gauge shotgun holders that holds a total of 12 shotgun rounds per holder left/right MADE BY EAGLE INDUSTRIES (no live ammo is included with this vest). (1) multicam camo dropleg adjustable holster with thigh straps. (1) Multicam camo IFAK first aid pouch. (1) Multicam camo 100 OZ. hydration/camelback system with brand new sealed in plastic rubber bite valve, Marked “US” and is a NEW military issued hydration system.______________________________________________________________________________________________________________________THIS VEST PACKAGE COMES WITH THE FOLLOWING ACCESSORIES NOT ATTACHED TO THE VEST AS PICTURED ON FLOOR: (1) MSA Gas mask, NEW in factory plastic case, with instruction manuel and a MSA sealed in foil "CBRN" FILTER (chemical,biological,radioactive,nuclear), (1) Multicam camo IFAK with over 70 different medical supplies in it including scapels, sutures, large bandages and much more as seen in the photos, (1) Set of Multicam camo MECHANIX fastfit tactical gloves, ESS Goggles pouch, owners manuel, extra lens, and anti-fog drops, Triple Rifle Multicam camo pouch with bungee closure that holds a total of six rifle magazines, (1) Triple pistol Multicam camo pouch that holds three pistol magazines. All items are BRAND NEW, or are new old stock, unless otherwise stated and were taken out of the factory packaging for the auction photos.

10 stainless steel, black-finished, 30-round ASC AR15 5.56 magazines with anti-tilt followers.

VERY RARE KRYPTEK TYPHON NIGHT CAMO VEST PACKAGE WITH ACCESSORIES! TYPHON NIGHT CAMO VEST PACKAGE FROM KEYPTEK. VEST IS ADJUSTABLE IN THE SHOULDERS AND THE WAIST AND IS A MEDIUM/LARGE SIZE. THE LEFT AND RIGHT SIDE OF THIS VEST BOAST BUILT-IN RIFLE MAGAZINE POUCHES WITH A ADJUSTABLE METAL SNAP CLOSURE. This vest can accommodate front, back, and side hard rifle plates inside of it, but they are not included in the vest package.._____________________________________________________________Included with this vest package is the following items: Quad Typhon Camo rifle pouch that holds two rifle magazines per slot for a total of eight rifle magazines. Typhon camo adjustable thigh pistol holster with belt attachment. Typhon Boonie cover hat. Typhon camo side plate pouches. Typhon camo canteen/Saw pouch. Typhon camo gas mask pouch. Typhon camo goggle type pouch. Typhon medium size medical/dump pouch.____________________________________________________________LEFT AND RIGHT SHOULDER/BICEPS PROTECTORS WITH LEVEL 3A ARMOR INSERTS AND 12 GAUGE SHOTGUN REMOVABLE 6 ROUND INSERTS ON THE SIDES (no live ammo included) GROIN PROTECTOR WITH LEVEL 3A INSERTS. ________________________________________________________Additional accessories are an MSA ULTRA ELITE full view gas mask that is new with paperwork in a sealed plastic factory case. Black color Magpul multimission MS3, single point or double point, rifle sling with steel attachments. One Gentex level 3A tactical helmet, black in color, helmet appears to have never been used and has a chin suspension system and has removable mounts on the sides for a visor or face shield. One black in color, eagle industries, paddle holster for a 1911 pistol.ONE PUNISHER/AMERICAN FLAG VELCRO PATCH._______________________________________________________________All items are new old stock unless otherwise stated and were taken out of the factory plastic for these pictures. Please note that some of the pictures might look like a different color or shade, due to the flash of the camera, but all the TYPHON CAMO Is all the same and matching.

Korean KCI M1 Carbine No. 15. 30 magazines of 15 rounds. They are brand-new commercial magazines, but owing to international delivery, they can have blemishes.