Tactical Vest LIII Armor Plates Stop .308 7.62 NF

Korean KCI M1 Carbine No. 15. 30 magazines of 15 rounds. They are brand-new commercial magazines, but owing to international delivery, they can have blemishes.

Full size conversion (5 ") 1911 pistol frame to.22 lr caliber works with most custom 4 devices as well "slides target sights that are movable fully assembled slides contains a 10-round.22 caliber magazine Authentic fresh in a sturdy plastic case Not compatible with the Taurus PT 1911 or the Para GI exper

ABU CAMO “AIRMAN BATTLE UNIFORM” CAMO TACTICAL VEST PACKAGE WITH LEVEL IV HARD ARMOR CERAMIC PLATES AND LEVEL 3A SOFT ARMOR INSERTS FOR THE SHOULDERS AND GROIN. EXTREMELY RARE PACKAGE!_________________________________________________________ The vest is a SIZE MEDIUM/LARGE, and is adjustable in the waist and the shoulders. THIS TACTICAL VEST WAS CUSTOM MADE BY BEEZ COMBAT SYSTEMS in 2018, MARKED PLATE CARRIER MOLLE SYSTEM, MADE IN THE USA. WE ONLY HAVE ONE OF THESE PACKAGES AVAILABLE. ___________________________________________________________The ABU CAMO VEST COMES WITH FRONT AND BACK, LEVEL IV, STAND ALONE, LIGHTWEIGHT CERAMIC RIFLE PLATES. THE RIFLE PLATES ARE CAPABLE OF DEFEATING MULTIPLE ARMOR PIERCING ROUNDS. THE LEVEL IV CERAMIC ARMOR RIFLE PLATES ARE THE ABSOLUTE HIGHEST PROTECTION YOU CAN HAVE FROM ARMOR PIERCING RIFLE ROUNDS IN A VEST PACKAGE. The ABU CAMO tactical vest package comes with the following POINT BLANK ARMOR, LEVEL 3A SOFT ARMOR. SHOULDER/BICEPS PROTECTORS “DAPS”, AND A POINT BLANK ARMOR GROIN PROTECTOR. THE VEST COMES WITH A HEAVY DUTY, SINGE POINT, BUNGEE SLING WITH DOUBLE CARABINER MOUNTS, AMERICAN FLAG PUNISHER VELCRO PATCH, GENTEX HELMET IN GREEN COLOR, LEVEL 3A, WITH CHIN SUSPENSION SYSTEM, AND A NIGHT VISION RHINO MOUNT FOR THE HELMET. ______________________________________________________________This Tactical vest package comes with 22, assorted ABU CAMO, MATCHING pouches which is very rare. ABU CAMO PONCHO WITH CASE, NEW 100 oz. hydration/camelback system NEW in plastic, ABU LOAD BEARING TACTICAL BELT, Tactical Assault Systems shotgun/breacher ammo pouch that holds 18 shotgun rounds, (NO LIVE ROUNDS INCLUDED IN THIS AUCTION) . All gear was taken out of factory plastic for the pictures and is new, never used. All gear is military issued. ALL THIS GEAR COMES IN A BRAND NEW, OD GREEN, XTRA-LARGE SIZE, CANVAS MILITARY DUFFLE/SEA BAG WITH AMERICAN FLAG VELCRO PATCH.

30 round new Magpul AK-47 7.62x39 magazines. They will function in common double-stack 7.62x39 AK-type rifles, though they could require a little filing to function in some imported guns that had their magwells opened.

SPECIAL FORCES VEST PACKAGE IN PARACLETE, MULTICAM CAMO, WITH ARMOR ATTACHMENTS AND ACCESSORIES This vest is SIZE LARGE/X-LARGE and has complete shoulder and waist adjustments. This Paraclete special forces vest includes a KEVLAR, LEVEL 3A helmet with chin strap suspension system, multicam camo helmet cover, and a completely NEW pair of ESS GOGGLES that were removed from the factory plastic for the purpose of these photos and come with all the goggle accessories and pouch as pictured._____________________________________________________________________________________________________________________ THIS PARACLETE VEST COMES WITH THE FOLLOWING KEVLAR ARMOR FOR THE VEST: LEVEL 3A KEVLAR GENTEX HELMET (helmet is in excellent condition and was never fielded but would be considered used because it was not taken out of the factory packaging) As mentioned before The helmet comes with a multicam camo helmet cover and has a chin suspension system that is adjustable. LEVEL 3A ARMOR SHOULDER/BICEPS PROTECTORS “DAPS”. LEVEL 3A ARMOR multicam camo GROIN PROTECTOR, LEVEL 3A ARMOR multicam camo LOWER BACK PROTECTOR. LEVEL 3A ARMOR multicam camo SIDE POUCHES WITH ARMOR INSERTS._____________________________________________________________________________________________________________________ This RARE vest package comes with The following accessories on the VEST: LEFT/RIGHT multicam camo shoulder pads with 9 slots on each side for rifle Ammo/ blasting detonators/communication wires. (1) multicam camo admin pouch on the front of the vest with a flashlight pouch and a multicam camo American flag Velcro patch. (1) Triple pistol multicam camo mag Pouch. (1) Triple rifle multicam camo magazine pouch that holds a total of six rifle magazines. (1) heavy duty steel quick release bungee multicam camo single point rifle sling with carabiner shoulder clip attachments. (2) Side Breacher multicam camo 12 gauge shotgun holders that holds a total of 12 shotgun rounds per holder left/right MADE BY EAGLE INDUSTRIES (no live ammo is included with this vest). (1) multicam camo dropleg adjustable holster with thigh straps. (1) Multicam camo IFAK first aid pouch. (1) Multicam camo 100 OZ. hydration/camelback system with brand new sealed in plastic rubber bite valve, Marked “US” and is a NEW military issued hydration system.______________________________________________________________________________________________________________________THIS VEST PACKAGE COMES WITH THE FOLLOWING ACCESSORIES NOT ATTACHED TO THE VEST AS PICTURED ON FLOOR: (1) MSA Gas mask, NEW in factory plastic case, with instruction manuel and a MSA sealed in foil "CBRN" FILTER (chemical,biological,radioactive,nuclear), (1) Multicam camo IFAK with over 70 different medical supplies in it including scapels, sutures, large bandages and much more as seen in the photos, (1) Set of Multicam camo MECHANIX fastfit tactical gloves, ESS Goggles pouch, owners manuel, extra lens, and anti-fog drops, Triple Rifle Multicam camo pouch with bungee closure that holds a total of six rifle magazines, (1) Triple pistol Multicam camo pouch that holds three pistol magazines. All items are BRAND NEW, or are new old stock, unless otherwise stated and were taken out of the factory packaging for the auction photos.

This tactical vest has full front, back and side armor plate level III protection stops most common rifles calibers (5.56 7.62 .308). 100% made in the USA, top quality made by american workers! CATI AR500 patent pending swimmer/climber cut from plate allows for full range of arm movement with no interference from the top of the plate while still protecting vital organs. SPECS: VEST- PALS Webbing for Easy Configuration. * Removable Shoulder Pads with PALS Webbing * Fully Adjustable Shoulder Straps. * Durable Drag Strap on back and Heavy Duty D rings on the front * Cummerbund is adjustable for length. Eyelets and adjustable Bungee cord in the back. * Size: Fit S to XXL T-shirt sizes. ARMOR SPECS: 2 10"x12" front and rear plates, 2 6'x8" side plates. AR500 Armor Plate is a high hardness (HH) steel used for High Impact and Abrasion Resistant (AR) applications. To be effective in armor applications to perform to NIJ Level 3 standards, this plate should be in the 505-530 range on the Brinnell Harness Scale. Level 3 is rated for M80 Ball at 2800 Feet per second, all AK variants and defeats Green Tip M855 as well at 50 feet out of a 16 inch barrel. We utilize a Rhino Linings Industrial product that is recommended and developed specifically for anti-splatter (spalling) mitigation by Rhino Linings Military Research and Development. This is a premium coating that costs 30% more than standard truck bed liner coatings provided by others. The only other product on the market that is equal in properties is Line-X PAXCON. Multi-Curve CQB: At the forefront of AR500/AR600 forming technology, we’ve created a “Patent Pending” protected process to achieve the greatest comfort, concealable and weight distributing steel armor plates on the market (Combat Quad-Bend). The CQB is our top of the line forming process and is modeled from Tier 1 Operator plate multi-curvature that is tried and true for comfort and tactical applications. This plate wears lighter than any other steel armor on the market. The CQB can be placed in front or rear configurations. Also produce CQB Training plates for the gym and cross training, called CATI HIT system.SIDE PLATES are are the same level protection and coating process. 2-CQB MULTI-CURVE STEEL ARMOR 10x12 Base Coated Plates one full traditional full cut to wear in the rear of carrier for great coverage and one CQB Swimmer Plate for the front for great range of motion.

Please be aware that these are all used magazines for the M4/AR 15 that have minor scratches from rubbing during storage. But they all work just fine.

We discovered this original rear sight on a Smith & Wesson 320 revolving rifle a number of years ago. The replacement parts inventory from the Smith and Wesson Factory was released in a collection that includes a sizeable amount of them. Bins upon bins of New Old Stock components were there, some dating as far back as S&W No. 1, 2nd Issue Revolvers from the 1860s. But the majority of it dates from the early to mid-20th century. There was so much of it that these guys were having trouble identifying it all and a gunsmith friend of mine was helping them out. they are impossible to find and production was extremely limited.This sight was the only one they had. Aside from being in storage for over 100+ years and coming into contact with other parts, it was almost brand new, having never been installed on a gun. Smith and Wesson only produced 977 Model 320 Revolving Rifles. Here is a once-in-a-lifetime chance to pick up one up..